Drilling machines, vertical drilling machines

Having drilling machines at a plant, laboratory, educational complex, or garage allows you to solve any drilling problems. Pre-drilling holes with a diameter of 3 to 50 mm when drilling cast iron, steel, and all types of materials. Subsequent processing — thread cutting, finishing to the required purity class - countersinking, reaming - are also performed on our machines.

Let's consider some of the differences between the table-top group machines

Tabletop machines 2M112, 2M118 and 2M125. The main movement - spindle rotation is provided by the main drive of the machines, in 2M112 and 2M118 the drive is made through a belt drive and in 2M125 through a gearbox, the spindle feed is carried out manually. The drilling depth on the 2M112 machine will have to be controlled by a limb, and the 2M118 and 2M125 machines are equipped with limit switches. The machines differ from each other primarily in the diameter of the holes made in steel. The first machine allows you to drill holes D12 mm. The second has a maximum drilling diameter of D18 mm. The third has a maximum drilling diameter of D25 mm. In addition, with the second and third machines you can cut threads in holes up to 12 mm.

An important point that you should pay attention to when wanting to become the owner of the machine is the dimensions of the table, its dimensions also determine the dimensions of the parts in which drilling will be performed. In the first case, these are dimensions of 250x250 mm, in the second - 300x280 mm, in the third - 370x370 mm. On the 2M118 and 2M125 machines, the work table is rotary, which makes it possible to use the base of the machine as a work table when drilling large-sized workpieces.

Be sure to familiarize yourself with the size of the greatest travel of the spindle to understand what height of the part you can drill later. 100 mm - for the first machine and 120 - for the second and third. And at what distance is the spindle axis from the mid-size of the column generator.

You will have to mount the tool in the machine spindle. The spindle taper is important here. For 2M112, the taper corresponds to GOST 9953-82, its name is B18. And for 2M118 and 2M125 machines, it is Morse 3.

Rotation speeds for drilling different materials usually require different ones, read this article on the technical characteristics of the machine.

Naturally, before buying, consider the dimensions of the machine itself, whether it will fit in the place you have prepared in advance. Compare their overall dimensions and decide on a purchase.

Let's compare the universal vertical drilling machines 2S125MP and 2S132MP

The machines will provide drilling, reaming, countersinking, reaming holes, and thread cutting.

The engine power of the machines is different. In the first case it is 1.1 kW, and in the second - 4 kW. This also determines the range of hole diameters that can be drilled in steel, cast iron, non-ferrous metals and other materials with their help. 2S132MP - these are holes from 32 to 50 mm, but 2S125MP - from 25 to 30 mm. The range of threads cut, respectively, is M3-M33 and M5-M22. Spindle Morse taper for fixing the tool: 5 in the first and 3 in the second case.

The greatest spindle travel for the smaller one is 150 mm, for the larger one - 250 mm. The spindle speed range is selected so that you can calculate the cutting modes when performing any of the declared works. And as a result, get a high-quality machined hole that matches the drawing in terms of both the finish and the required dimensional tolerances.

Check out the table sizes, machine dimensions, speed and feed ranges specified in the technical specifications, and you will get a complete picture to decide which machine you need.

Let's compare universal vertical drilling machines

The main movement - spindle rotation of 2S125MP and 2S132MP is provided by the main drive of the machines, both machines have a gearbox drive.

The machines will provide drilling, reaming, countersinking, reaming holes, thread cutting.

The motor power of the machines is different. In the first case it is 1.5 kW, and in the second - 4 kW. This also determines the range of hole diameters that can be drilled in steel, cast iron, non-ferrous metals and other materials with their help. For 2S125MP - up to 25 mm, and for 2S132MP - these are holes up to 50 mm. The range of threads cut, respectively, is M5-M16 and M3-M33. The Morse taper of the spindle for fixing the tool: 4 in the first case and 3 in the second.

The greatest travel of the spindle for the smaller one is 150 mm, for the larger one - 250 mm. The spindle speed range is selected so that you can calculate the cutting modes when performing any of the declared works. And get as a result a high-quality processed hole that corresponds to the drawing both in terms of processing purity and the required dimensional tolerances.

Check out the table sizes, machine dimensions, speed and feed ranges specified in the technical specifications, and you will get a complete picture to decide which machine you need.

Our advantages

The plant's products try to meet any of your requests. Our machines solve all issues in the field of drilling materials. They are convenient and easy to maintain. Their quality has been tested by years of operation. The prices are reasonable and affordable.

The machines are in demand both in Russia and in neighboring countries. We guarantee their uninterrupted operation for many years, we are ready to listen to your suggestions. The order is processed by our managers easily and quickly. Payment by any method available to you. We provide delivery to any of the specified regions.