Pneumatic guillotine shears

Pneumatic guillotine shears are an example of the production of shears that retain the best solutions of the domestic engineering school and modern solutions in terms of shear control. Pneumatic shears are distinguished by high cutting accuracy, which is ensured by increased rigidity and strength of the frame using bolted connections and a table with milled grooves and roller supports to facilitate the movement of the sheet. The frame of the shears is made and welded from certified domestic steel. The main features of shears with a pneumatic drive using a brake clutch model UV - low noise, cutting accuracy. The optimal choice for working with thin sheet metal, non-ferrous metals and alloys.

Range of characteristics of pneumatic shears

• Maximum cutting length: from 400 mm to 3150 mm;
• Thickness of the cut material: up to 16 mm;
• Maximum thickness of stainless steel: up to 12 mm;
• Angle of inclination of the knife beam: 1.2 - 2.5 degrees;
• Standard stroke of the back stop (increased): 450 mm to 1000 mm
• Back stop speed: 300 - 500 mm/s (optional when ordering an electric stop)
• Back stop accuracy: +/- 0.05 mm;
• Back stop positioning repeatability: +/- 0.03 mm;
• Power: 4.0 - 36 kW.

Standard equipment of pneumatic shears

Additional options for pneumatic shears

Additionally or optionally, pneumatic guillotine shears can be equipped with:

• Front table extensions;
• Ball bearings to facilitate sheet movement;
• Laser cutting line indicator;
• Rubber pads to reduce sheet deformation during cutting;
• Electromechanical rear stop with digital readout device
• Table blower device;
• Driven and non-driven roller conveyors
• Driven and non-driven retractable trolleys

This list of options can be add.