Roll bending machines

The profile bending machine (section bending machine), model IB3230 is designed for bending section rolled products. This profile bending machine is designed and manufactured specifically for bending profiles with a high coefficient of bending resistance.

For this reason, the frame structure is made with a large margin of safety, the machine frame is rigid, has a large weight and is welded from thick sheets.

Domestic steel with all the certificates. The frame is made using electric welding and has undergone special treatment to remove internal residual stresses. The strength of the frame structure is, indeed, the only condition for guaranteeing reliability and accuracy of operation throughout the entire period of operation of the machine.

The high quality of the profile bending machine is guaranteed by the use of modern hydraulic and electrical components.

Standard machine equipment

• A set of 3 universal rollers for bending certain types of rolled products;
• Adjustment of the position of the universal rollers using gearboxes;
• Bending of rolled products using two rollers with a hydraulic drive;
• Special guide rollers that ensure easy movement of the workpiece;
• Simultaneous movement and rotation of the bending rollers;
• Adjustable speed of rotation of the rollers to allow connection of different diameters in space;
• Hydraulic station and gearbox for roller rotation;
• Special and high-strength steel for rollers;
• The design of the machine bearings, with a long service life.
• Mobile control panel on wheels.

When ordering a machine according to the customer's specifications, the equipment may differ from the standard configuration and allows you to cover all needs within the technical capabilities of the machine. The bending machine allows you to bend all standard profiles. The special design of the roller drive allows you to guide the profile in an optimal way during all stages of bending. Guide rollers supplied in the standard configuration allow you to control the flatness of the bend using a hydraulic drive, calibrate the bending radii immediately after exiting the rollers and correct the twisting of the profile.

Additional options for the machine:

• Rollers for bending pipes;
• Hydraulic guides for bending beams;
• Device for spiral bending;
• Equipment for changing tools;
• Automatic profile feeders;
• Special asymmetric modifications;
• Automatic measurement of radii;
• Touch control from the operator's console.

Software allowing to control:

• Profile selection;
• Working cycle selection;
• Bending radius setting;
• 3D verification and modeling;
• Automatic bending cycle;
• Program archive.